Inhibitory Propylene Glycol Antifreeze Solution

• Customization: Available
• CAS No.: 57-55-6
• Formula: C3h8o2
• EINECS: 200-338-0
• Classification: Alicyclic Alcohol
• Appearance: Liquid
• Type: 0 °
• Hydroxyl No.: Monohydroxy
• Grade Standard: Electron Grade, Food Grade, Ind
• Storage: Cool Dry Place
• Sample: Availiable
• Transport Package: Barrel
• Specification: 200kg/barrel
• Trademark: chemcola
• Origin: China
• HS Code: 2905320000
• Production Capacity: 2000tons/ Day

Product Description

Introduction

CM-WB inhibitory propylene glycol antifreeze, using industrial grade propylene glycol (99.9%), softening water, using professional resist package, special pigment production and processing. It is widely used in the process cooling loop, automobile and air conditioning system to provide antifreeze and anti-corrosion protection. CM-WB inhibitory propylene glycol antifreeze has the minimum antifreeze temperature-60ºC, the minimum available flow temperature-50ºC, and the maximum available temperature is 120ºC. CM-WB inhibitory propylene glycol antifreeze contains industrial compound corrosion inhibitors, which can provide protection for metals (mainly iron, copper and aluminum metals).
 

 

 
When CM-WB inhibitory propylene glycol antifreeze is supplied as a concentration, please use at the used concentration provided in the table below:
Table 1: CM-WB concentration (1,2-propylene glycol concentration 90%) concentration used

mass concentration%	volume concentration%	freezing point ºC	boiling point ºC	The specific gravity is 22ºC
15.0	14.2	-4.5	100.0	1.013
20.0	19.3	-6.3	101.0	1.018
24.0	24.4	-8.3	101.0	1.022
27.0	26.4	-9.2	101.0	1.023
30.0	29.4	-10.8	101.0	1.026
34.0	33.5	-13.1	102.0	1.029
37.0	36.5	-15.1	102.0	1.032
40.0	39.6	-17.3	103.0	1.034
44.0	43.6	-20.7	104.0	1.037
47.0	46.7	-23.5	104.0	1.040
50.0	49.7	-26.7	104.0	1.042
54.0	53.8	-31.5	105.0	1.046
57.0	56.8	-35.5	106.0	1.048
60.0	59.8	-39.8	106.0	1.051
64.0	63.9	-46.3	107.0	1.054

  Direct use of the liquid and physical property data sheet
CM-WB direct type of inhibitory propylene glycol, no dilution, direct use. When the concentration of propylene glycol is 45%, the physical parameters of CM-WB direct use are shown below:
Table 2: Basic physical properties data sheet of CM-WB direct-use antifreeze (propylene glycol concentration 45%)

mass concentration%	volume concentration%	freezing point ºC	boiling point ºC	The rupture temperature is ºC	The specific gravity was 20ºC
45.0	44.1	-25.0	104.0	-25.0	1.037

Table 3: Detailed physical data sheet of CM-WB inhibitory propylene glycol antifreeze (45%)

end-use temperature ºC	-25	-20	-15	-10	0	10
dynamic viscosity cP	120.5	60.7	41.2	28.8	15.3	8.90
Density of kg / m3	1063.5	1057.4	1055.8	1054.0	1050.1	1045.7
heat conductance W/m/K	0.320	0.329	0.333	0.338	0.347	0.355
The specific heat is kJ / kg / K	3.454	3.474	3.492	3.510	3.546	3.581
tension kPa
end-use temperature ºC	20	40	60	80	90	100
dynamic viscosity cP	5.61	2.67	1.53	1.00	0.84	0.72
Density of kg / m3	1040.7	1029.3	1015.8	1000.3	991.8	982.7
heat conductance W/m/K	0.363	0.376	0.386	0.393	0.395	0.396
The specific heat is kJ / kg / K	3.617	3.689	3.760	3.832	3.868	3.904
tension kPa			17.7	41.7	61.4	88.5
end-use temperature ºC	110	120
dynamic viscosity cP	0.63	0.56
Density of kg / m3	973.1	963.0
heat conductance W/m/K	0.397	0.397
The specific heat is kJ / kg / K	3.939	3.975
tension kPa	124.9	172.7

 Notes for use

1, prohibited to use tap water, groundwater and other high hardness water dilution;
2. No entry into other unidentified chemicals;
3. In order to extend the working life, it is recommended to use airtight, or use nitrogen seal to isolate oxygen;
4, the normal use of pH> 7.5, when the pH is less than 7.5, please contact senbo chemical technicians;
5. Do not use it in the non-working temperature range; 

Other products we can supply

                            Corrosion inhibitor                                                              Ethylene glycol based Coolant                             

 

Our team

Our clients